Autumn
October in the yard: leaves, the last feedings and the first frost
October is when the temperature starts to set the schedule. Leaves come down in the north, the last nitrogen goes on before the ground freezes, and in the South the winter-weed and fungus windows open as nights cool.
By LawnElm Editorial Team Updated 6 min read
- Cool belt
- Leaves and a light feeding
- Warm belt
- Winter weeds, large patch
- Dry West
- Final feeding window
Short version
In October, cool-season lawns keep their mowing height until growth stops, get one moderate feeding once cool days slow leaf growth, and need leaves kept from smothering the grass. Warm-season lawns are watched for large patch and winter weeds, which extension calendars time by night or soil temperature. Frost dates vary a lot by county, so ask your county extension office.
October runs on temperature
In October the weather tells you more than the calendar does. Extension sources set several jobs by night or soil temperature or by the first frost, not by date, which is why the same task lands in different weeks in different counties. Find your belt on the state pages.
| Job | Trigger the source gives | Source |
|---|---|---|
| Moderate feeding, cool-season lawn | Days cool enough to discourage vigorous leaf growth (50 degrees F) | University of Missouri |
| Winter-weed preventer, Florida | Night temperatures of 55 to 60 degrees F for several days in a row | UF/IFAS Marion County |
| Winter-weed preventer, Texas | Soil near 70 degrees F for 4 to 5 days in a row | Texas A&M (2020 edition) |
| Raise the mower, St. Augustinegrass | Nights below 70 degrees F | Clemson Extension |
Cool-season belt
The University of Missouri's calendar (G6705, revised April 2025) gives three jobs for October and November: mow at regular heights until growth stops, fertilize moderately after cool days slow leaf growth, and keep leaves from packing and smothering the grass. It also says to be sure the lawn goes into winter with moist, not wet, soil. The University of Minnesota's table lists early October as a fourth application for high-maintenance lawns that are watered and have their clippings removed.
- Leaves: leaf cleanup covers raking, mowing and mulching them.
- Last feeding: lawn fertilizing explains the rates, and the lawn supplies tool converts a label to pounds for your area.
- Irrigation: where the ground freezes, winterizing irrigation is the job to schedule before the first hard freeze.
Transition belt
NC State's tall fescue calendar (AG-367, 2021) ends the piedmont and coastal plain overseeding window on October 1. For October and November it keeps the 2.5 to 3 inch mowing height, says to aerate lawns with heavy traffic or clay soil, and says to apply broadleaf herbicides as necessary for chickweed and henbit. Its second basic feeding, 1 pound of nitrogen per 1,000 square feet, is in November.
For bermudagrass, NC State's AG-431 says to apply potash four to six weeks before the expected frost, as a supplement to a low-nitrogen September feeding, and to raise the mowing height one-half inch in the coastal plain from late September to mid-October. Oklahoma State's calendar drops its watering figure to 1 inch a week in October and lists no October fertilizing. See lawn weed control.
Warm-season belt
Clemson's St. Augustinegrass program (HGIC 1218, revised 2018) says it is extremely important to treat with fungicides during the fall months for large patch and that, where it comes back every year, a preventive application may start in early October. It says to raise the mower one-half to 1 inch once nights fall below 70 degrees F, and to treat insect problems before the first frost. Texas A&M's older calendar gives a large patch fungicide window of soil temperatures between 50 and 70 degrees F.
UF/IFAS Marion County's calendar says the winter-weed preventer goes down around October 31 when nights reach 55 to 60 degrees F, and is repeated 6 to 9 weeks later. UF/IFAS gives mid-October as the last feeding in Central Florida. Ask your county office whether a fungicide or weed preventer fits your lawn, and read lawn weed control before any label is opened.
Dry West
Colorado State's lawn basics page gives early October to early November as the final nitrogen window and says the last application should come at least two to three weeks before the ground begins to freeze. It says to mow at 2.5 to 3 inches all year, with no reason to mow shorter in late fall. In dry weather, it says a thawed lawn may still need water every four to six weeks through the winter.
Check your water provider for any seasonal watering rules. If your system has lines that can freeze, plan the shutdown with winterizing irrigation.
Around the calendar and the yard
September's feeding and seeding are on the September page, and the last feedings, leaf drop and first snow are on the November page. To estimate how much lawn you are raking or feeding, use the lot to lawn tool.
Questions people ask
When should I stop mowing in the fall?
Missouri says to mow at regular heights until growth stops, and Colorado State says there is no reason to mow shorter in late fall. The date depends on your frost, so follow the grass, not the calendar.
Should I leave leaves on the lawn?
Missouri says to keep leaves from packing and smothering the grass. See leaf cleanup for options.
Is October too late to fertilize?
For cool-season lawns, extension sources still list October. Missouri says to fertilize moderately after cool days slow leaf growth, and Colorado State gives early October to early November as its final window. For warm-season lawns Clemson says to apply no nitrogen in fall.
What is large patch?
It is a fungal disease of warm-season lawns. Clemson says it is extremely important to treat with fungicides during the fall months where it occurs, and Texas A&M gives soil temperatures of 50 to 70 degrees F as the preventive window. Ask your county extension office before you buy or spray anything.
Sources
- Cool-Season Grasses, Lawn Maintenance Calendar, G6705 (University of Missouri Extension)
- Fertilizing Lawns (University of Minnesota Extension)
- Tall Fescue Lawn Maintenance Calendar, AG-367 (NC State Extension)
- Bermudagrass Lawn Maintenance Calendar, AG-431 (NC State Extension)
- Cool-Season Lawn Management Calendar, L-442 (Oklahoma State University)
- St. Augustinegrass Yearly Maintenance Program, HGIC 1218 (Clemson Extension)
- St. Augustinegrass Home Lawn Maintenance Calendar, EHT-141 (Texas A&M AgriLife Extension)
- Lawn Care Calendar for Marion County (UF/IFAS Extension)
- Best Management Practices for Your Lawn (UF/IFAS Gardening Solutions)
- Hurricane climatology (National Hurricane Center, NOAA)
- Lawn Care Basics (Colorado State University Extension)
Dates and amounts come from the extension publications above and were checked on November 20, 2026. Texas A&M's calendar is a 2020 edition, Clemson's was last revised in 2018, and Oklahoma State's does not print an edition year. Timing moves with the year and the county, so ask your county extension office for the dates that fit your lawn.
Next in the yard
-
Yard job
Leaf cleanup
Mulch, compost or remove leaves, with the depth limits extension services give.
-
Yard job
Lawn fertilizing
When to feed cool- and warm-season lawns, how to size a feeding, and what rules apply.
-
Yard job
Winterizing irrigation
Blowout, backflow devices and timing, with the limits extension services give.